Part Number: 81CP0101©2012 Pella CorporationINSTALLATION INSTRUCTIONS - INSTRUCCIONES PARA LA INSTALACIÓN CLAD WINDOWS WITH FLUSH FLANGELea las instr
2"1AYOU WILL NEED TO SUPPLY:•CompositeorImperviousshims/spacers (12 to 20)•Pressure-treated2x4(4-6ft)•3-1/4”nishheadscrews(16-20)•
1/4" minimumSealant1FRepeat steps C - E for all four sides of the opening.F. Remove any debris, paint or stucco from the exterior face of the ex
I. Install wood blocking around the entire opening. The blocking must be the same height as the existing aluminum window frame. The blocking must ext
Drill 1/8"clearance holeDouble-Hung Jamb1/4"Double-Hung HeadDrill 1/8"clearance hole1/2"Double-Hung SillDrill 1/8"clearance h
Window Frame 3/4" Min. A. Test fit the window in the opening from the exterior. Insert shims around the window temporarily while you verify that
A. Place a corner bead of sealant on the edge of the window flush flange on top, sides and bottomtothestucco.Leavea2"gapinthesealant bea
TheexteriorframeandsashareprotectedbyaluminumcladdingwithourtoughEnduraClad® or EnduraCladPlusbaked-onfactorynishthatrequiresnop
INSTALLING ROTO COVER AND CRANKNote: You may want to remove the lock lever prior to finishing the window, or if it needs to be replaced with a lock lev
Comments to this Manuals